
AT7910E [DATASHEET]
7796G AERO 02/13
Asserted Low to read from the external output port one
FIFO.
FIFO ready signal for external input port one. When high
there is space in the FIFO so it can be written to. When
low the FIFO is full.
Asserted Low to write to the external input port one FIFO.
The rising edge of the EXT_TICK_IN signal is used to
indicate when a time- code is to be sent
EXT_TIME_IN(7:0) provides the value of the time-code to
be distributed by the router
If SEL_EXT_TIME is high on the rising edge of
EXT_TICK_IN the value on EXT_TIME_IN(7:0) is loaded
into the internal time-code register and propagated by the
router.
This signal causes the internal time-code counter to be
reset to zero.
The falling edge of EXT_TICK_OUT is used to indicated
the reception of a time-code.
Received time-code value which is valid when
EXT_TICK_OUT is asserted.
Select the error indication status signals to be output on
STAT_MUX_OUT
After reset the STAT_MUX_OUT pins are inputs which
define the power on configuration status of the router.
After the power on reset configuration of the router has
been read from STAT_MUX_OUT the pins are driven as
outputs by the router.
Notes:
1. Groups of pins represent busses where the highest number is the MSB.
2. O = Output; I = Input; I/O = Input/Output
3. XXX* = active low signal
Kommentare zu diesen Handbüchern